Bidet Shower Kit
Home / New Products / Bidet Shower Kit
Bidet Shower Kit
MODEL NO. | SY-6138W/G | SY-6138W/P | SY-6138W/S | SY-6138I/S | SY-6138I/P |
---|---|---|---|---|---|
MODEL PICTURE | |||||
DESCRIPTION |
|
|
|
|
|
MATERIAL | ABS | ABS | ABS | ABS | ABS |
MOQ | 200 | 200 | 200 | 200 | 200 |
UNIT PACKING | Color Box | Color Box | Color Box | Color Box | Color Box |
UNIT PACK DIMENSIONS (CM) | 47*25*12.7CM | 47*25*12.7CM | 47*25*12.7CM | 47*25*12.7CM | 47*25*12.7CM |
DIMENSIONS (CM) | 79*52*49CM | 79*52*49CM | 79*52*49CM | 79*52*49CM | 79*52*49CM |
CUBE (M3) | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 |
QTY. | 12 | 12 | 12 | 12 | 12 |
GROSS WT. (KG) | 17.3 | 17.3 | 17.3 | 17.3 | 17.3 |
洗屁屁英文安裝說明書
PP Bidet Shower Kit /Assembly Instruction
Turn off the toilet’s water supply by shutting off stop-valve clockwise near the wall. Flush the toilet to empty its tank. Disconnect the connection hose.
Turn off the toilet’s water supply by shutting off stop-valve clockwise near the wall. Flush the toilet to empty its tank. Disconnect the connection hose.
Install the pressure reducing-filter valve kits (water filter valve and a 75 cm long white PVC water hose), onto the junction valve and reconnect the connection hose. Tighten securely with screwdriver.
Remove the toilet seat, which is held in place with two bolts. Remove the two nuts on the hinge and lift the toilet seat with both hands straight up. Extend the toilet seat to about 1.5cm above the toilet.
Insert the bidet kits between toilet and toilet seat:
Perpendicularly insert the 2 mounting bolts in. Tighten the two nuts on the hinge. Be careful not to over-tighten the nuts or the seat might be hard to remove later.
Perpendicularly insert the 2 mounting bolts in. Tighten the two nuts on the hinge. Be careful not to over-tighten the nuts or the seat might be hard to remove later.
Adjust the swirl nozzle and wand head to a comfortable position: Adjust the rolling track to aim the wand head for the center of your toilet seat. Adjust the wand head frontward/backward to a comfortable position. Turn on the toilet’s power supply near the wall. Adjust the swirl nozzle and wand head again, if necessary. Select your desired water pressure to wash the front or rear by adjusting pressure on the rotary switch.
Although you can install a washlet by yourself, we recommend you use a licensed plumber.